Promise Technology Pegasus3 R4 Product Manual Download

Page: 205 / 232

192

Promise

Technology

Pegasus3 R4/R6/R8

Pegasus Utility

If you can open the Pegasus Utility, but you cannot create or delete disk arrays and logical drives, nor

can you make settings changes, check the UI lock. See “Unlocking the UI in Mac” on page 51.

Viewing the Event Logs

Viewing Event Logs includes:

•

“Viewing Runtime Events”

•

“Viewing NVRAM Events”

•

“Event Severity Descriptions”

Viewing Runtime Events

To display Runtime Events, click the

Events

icon. The log of Runtime Events appears.

Events are added to the top of the list. Each event includes:

• Index

– Sequence number of the event. Begins with 0 at system startup.

• Device

– Disk Array, Logical Drive, Physical Drive by its ID number.

• Event ID

– Hexadecimal identifier of the event

• Severity

– (lowest to highest) Information, Warning, Minor, Major, Critical and Fatal

• Time

– Date and time the event happened.

• Description

– A description of the event in plain language.

View Runtime Events

Summary of Contents for Pegasus3 R4








































































































































































































































Search results

Summary of Contents for Pegasus3 R4

Reviews:

Related manuals for Pegasus3 R4

Brands by name

Popular brands

Promise Technology Pegasus3 R4, Product Manual

Search results

Summary of Contents for Pegasus3 R4

Reviews:

Related manuals for Pegasus3 R4

Brands by name

Popular brands