Promise Technology Pegasus3 R4 Product Manual Download

Page: 52 / 232

Installation and Setup for Windows Users

Pegasus3 Product Manual

Step 7: Check firmware version with Pegasus Utility

It might be necessary to update the firmware on the Pegasus3. If you do not know the firmware version,

use Pegasus Utility to check the firmware version. Go to

Admin>Firmware Update

to see the

Single

Image Version

number. Follow the instructions below to update the firmware before using the Pegasus3.

Updating Firmware

The update procedure should be done before using the Pegasus3 with your Windows computer.

Make sure to download the latest firmware from the PROMISE website at

www.PROMISE.com/support/

download.aspx

and place the .img file on your computer.

To update the controller firmware:

1. From the

Admin

menu tab, choose

Firmware Update

. Check the

Single Image Version

number.

If the version number is 6.00.0000.12 the firmware does not need to be updated. If the number is

6.00.0000.11 or lower, continue with the firmware update procedure.

Click on the padlock icon to unlock the menu, and type in the password for your computer when

the prompt appears.

3. Click the

Browse

button and locate the .img file you downloaded from PROMISE.

4. Click the

Next

button.

In the Confirmation box, type the word “confirm” in the field provided and click the

Confirm

button.

The process will take several seconds. When it is completed, you will be prompted to restart the

computer. Restart your computer and continue to use the Pegasus3.

Summary of Contents for Pegasus3 R4








































































































































































































































Search results

Summary of Contents for Pegasus3 R4

Reviews:

Related manuals for Pegasus3 R4

Brands by name

Popular brands

Promise Technology Pegasus3 R4, Product Manual

Search results

Summary of Contents for Pegasus3 R4

Reviews:

Related manuals for Pegasus3 R4

Brands by name

Popular brands