SmartStor NS4300N Product Manual
102
Enabling and Disabling Plug-ins
Enabling Plug-ins
You must add a plug-in to SmartStor before you can use this function.
To enable a plug-in:
1.
In the Tree, click the
+
beside the
File & Print
icon to expand the Tree.
2.
Click the
Protocol Control
icon.
3.
In the
Information
tab, click the
Enable
button next to the plug-in you want
to enable.
4.
Click the
OK
button in the confirmation box.
After a moment, the Service Status changes to ON.
The plug-in is now enabled.
Disabling Plug-ins
Disabling a plug-in saves memory space and processing time on the SmartStor.
If you do not use a feature, consider disabling its plug-in.
To disable a plug-in:
1.
In the Tree, click the
+
beside the
File & Print
icon to expand the Tree.
2.
Click the
Protocol Control
icon.
3.
In the
Information
tab, click the
Disable
button next to the plug-in you want
to disable.
4.
Click the
OK
button in the confirmation box.
After a moment, the Service Status changes to OFF.
The plug-in is now disabled.
Removing Plug-ins
There are two reasons to remove a plug-in:
•
To replace the old plug-in with a new one
•
You know that you will never use the plug-in
Before you remove a plug-in, consider disabling it, instead. See “Enabling and
Disabling Plug-ins” on page 102.
To remove a plug-in from SmartStor:
1.
In the Tree, click the
+
beside the
Management
icon.
2.
Click the
System Upgrade
icon, then click the
Delete Plug-in
tab.
3.
Click the option button to the left of the plug-in you want to delete.
4.
Click the
OK
button.
