Chapter 5: SmartNAVI
75
Changing Network Settings
To change your network settings:
1.
Go to the
Main Window
.
2.
Click the
NAS Management
icon.
3.
Click the
Network Setting
button.
4.
Choose Automatic (DHCP) or Manual network settings.
If you chose Manual settings, type entries for each of the following
parameters in the fields provided:
•
Computer (NAS system) Name
•
IP Address
•
Subnet Mask
•
Gateway
•
Primary and Secondary DNS – optional
5.
Click the
OK
button.
6.
Click the
Yes
button in the Network Setup box.
7.
Click the
OK
button in the Information box.
The
Main Window
closes and the
MSN Window
opens.
8.
Click your system in the
NAS List
.
The
Main Window
reopens.
Note
When you create your RAID volume in PASM, you can choose
additional options, such as Multiple RAID volumes.
See “Setting up SmartStor with the Setup Wizard” on page 89.
Caution
If your NAS system is on a network, check with your Network
Administrator before you change the network settings. Incorrect
settings can result in address conflicts and connection failures.
