Check Sensor Input Status in CLI
To check the status for the device that issues a warning to the terminal board. Follow these steps:
1.
Open the CLI interface, type
<enclosure –v>
the sensor status displays.
2.
The Sensor Status displayed is dependant on the input pair that is used on the Sensor Input
interface. For example, the Input 4 pair (
IN_4+
and
IN_4-
) displays
Sensor Status
247
.
Use the value to calculate which pair is connected to a camera or alarm. Use the tables on pages
14 and 15 in “FAQ”.
7
IO Terminal Board User Information
Summary of Contents for Vess A2000 Series
Page 18: ......