Promise Technology VessRAID 1720i Product Manual Download

Page: 209 / 354

Chapter 5: Management with the CLU

193

Managing Users

User Management includes the following functions:

•

Viewing User Information (page 193)

•

Creating a User (page 193)

•

Changing a User’s Password (page 194)

•

Changing a User’s Display Name and Email Address (page 194)

•

Changing a User’s Privilege and Status (page 195)

•

Deleting a User (page 195)

Viewing User Information

Each user types their user name and password to log into the CLI.

To view a list of current user accounts:

From the Main Menu, highlight Additional Info and Management and press
Enter.

Highlight User Management and press Enter.

A list of the current users appears.

Creating a User

To create a new user account:

From the Main Menu, highlight Additional Info and Management and press
Enter.

Highlight User Management and press Enter.

Highlight Create New User and press Enter.

Highlight each field and type in the appropriate information:

•

User name (no spaces)

•

Password (Optional. Maximum 31 characters. Use letters, numbers,
and underscore)

•

Display name (Optional)

Highlight Privilege and press the space bar to toggle though the options:

For definitions of each privilege level, see the List of User Privileges below.

Highlight Status and press the space bar to toggle between the options:

•

Enabled – Allows the user to log in to the system

•

Disabled – Prevents the user from logging in to the system

Press Ctrl-A to save the user.

Summary of Contents for VessRAID 1720i



































































































































































































































































































































































Search results

Summary of Contents for VessRAID 1720i

Reviews:

Related manuals for VessRAID 1720i

Brands by name

Popular brands

Promise Technology VessRAID 1720i, Product Manual

Search results

Summary of Contents for VessRAID 1720i

Reviews:

Related manuals for VessRAID 1720i

Brands by name

Popular brands