Promise Technology VessRAID 1720i Product Manual Download

Page: 67 / 354

Chapter 4: Management with WebPAM PROe

Working with the Storage Network

When you log into WebPAM PROe, you access a specific VessRAID subsystem.
See “Logging into WebPAM PROe” on page 44.

The Storage Network feature enables you to access all of the VessRAID
subsytems with a Management Port connection to your network.

Each VessRAID subsystem is identified by its Management Port IP address.

Storage Network functions include:

•

Viewing other subsystems

•

Updating the list of subsystems

•

Logging into a subsystem

•

Hiding the other subsystems

Viewing Other Subsytems

To view the other VessRAID subsytems the Storage Network:

Click Storage Network in the Header.

Click the Show Network Subsystems popup option.

The list will show all subsystems the network at the time the GUI was
launched.

Updating the List of Subsystems

To update the list of the VessRAID subsytems the Storage Network:

Click the Discover button at the bottom of the subsystem list.

Logging into a Subsystem

To log into any of the displayed VessRAID subsystems:

In Tree View, click the Subsystem

icon of the subsystem you want to see.

If your user name and password do not match the subsystem you are
logging into, the log in screen will appear.

Log into the new subsystem, as needed.

Hiding the Other Subsystems

To hide the other VessRAID subsystems the Storage Network:

Click Storage Network in the Header.

Click the Hide Network Subsystems popup option.

Summary of Contents for VessRAID 1720i



































































































































































































































































































































































Search results

Summary of Contents for VessRAID 1720i

Reviews:

Related manuals for VessRAID 1720i

Brands by name

Popular brands

Promise Technology VessRAID 1720i, Product Manual

Search results

Summary of Contents for VessRAID 1720i

Reviews:

Related manuals for VessRAID 1720i

Brands by name

Popular brands