VTrak 15110 User Manual
164
7.
Review the list. If you agree with the list, press
Y
and
Enter
. If you disagree
with the list, press
N
and
Enter
, then select
Create New Disk Array
again.
If you clicked Y, the new disk array appears.
ID Name
RAID SBS
CAP
Member PDs
Status
--------------------------------------------------------------------------------------
1 Daves Array
5
64K
357GB 1,3-4,9
Functional
-------------------------------------------------------------------------------------------
This completes disk array creation. Go to Disk Array Properties and select
Create
Logical Drive
(page 165).
Delete Disk Array
Use this feature to delete an existing disk array. Be careful when deleting disk
arrays. Be sure the disk array you delete is the one you intended to delete.
1.
Press
3
and
Enter
to select Delete Disk Array.
Select the Disk Array ID to delete>
2
Delete Disk Array 2(y/n)?>
y
2.
Type the ID number of the disk array you wish to delete and press
Enter
.
3.
To confirm deletion, press
Y
and
Enter
. To cancel, press
N
and
Enter
.
Disk Array Properties
Press
4
and
Enter
to access the Disk Array Properties menu. If you have more
than one logical drive, specify the one you want by its ID number and press
Enter
. Above the menu is a table of the current settings for this logical drive.
Stripe Block Size: 64K
Disk Array #1 Mapping: GB
-----------------------------------
| 100 GB | 100 GB | 39 GB |
-----------------------------------
--------------------------------------------------------------------------
Name: Daniels Array
RAID Level:
5
Member LDs:
1-2
Stripe Block Size: 64K
Capacity:
240 GB
Member PDs:
1,3-4,7
SMART Check:
On
Cache Policy:
Write Through
Retry Count:
2
Auto Rebuilding: On
Hot Spare Policy: Global
Priority: High(RBLD), High(SYNC), High(Migration), High(RC), High(PDM)
--------------------------------------------------------------------------
Disk Array 1 Properties
1. Create Logical Drive
