VTrak 15110 User Manual
174
Gateway IP Address: 10.0.0.3
-------------------------------------------------------------------------
Management Port
1. DHCP
2. Management Port IP
3. Subnet Mask
4. Gateway
R. Return to Previous Menu
Please enter your menu choice>
1
2.
Press
2
and
Enter
to select Management Port IP.
--------Configure Management Port IP address--------
Current management port IP Address: 10.0.0.2
Modify management port IP address(y/n)?>
y
New management port IP address>
192.168.1.56
(an example only)
New management port IP address: 192.168.1.56
Press Enter key to return
3.
Press
Y
and
Enter
to modify the management port IP address.
4.
Type the new IP address and press
Enter
.
VTrak confirms the new address.
5.
Press
Enter
to return to the Network Management menu.
6.
Repeat steps 2 through 5 to set the Subnet Mask and Gateway IP address
7.
Reboot the VTrak for these changes to take effect.
Telnet
Telnet allows you to use the CLU to manage VTrak over a network. The Telnet
screen looks the same as the CLU screen, except that you have to log in. You
must enable Telnet on VTrak before you can establish a Telnet connection.
Enable/Disable Telnet
1.
Press
2
and
Enter
to access the Telnet settings.
Current Telnet settings:
Telnet: enabled
Timeout: 600 seconds
Port: 2300
User Name: administrator
---------------------------------------------------
Telnet Settings
1. Enable/disable Telnet
