Promise Technology VTrak D5000 Series Product Manual Download

Page: 217 / 245

-d <POOL ID or POOL ID List> When used with -a list, it is used to specify a pool id. The result of the list

will be the global spares and the dedicated spares to this pool. When

used

with other actions, it is used to specify the ids list of the pools to which

the

spare is dedicated.

-t <type> Type of hot spare to manipulate.

A global hot spare will replace any drive from a redundant pool of same

size or smaller.

A dedicated hot spare will only replace drives from pools in which the

spare is associated with. Drives that are being replaced must be of the

same size or smaller.

-r <revertible> Whether the spare drive is revertible or commited.

Revertible.

Committed.

-v

Verbose mode. Used with -a list. spare is dedicated.

-t <type>

Type of hot spare to manipulate.

A global hot spare will replace any drive from a redundant pool of same

size or smaller.

A dedicated hot spare will only replace drives from pools in which the

spare is associated with. Drives that are being replaced must be of the

same size or smaller.

-r <revertible>

Whether the spare drive is revertible or commited.

Revertible.

Committed.

-v

Verbose mode. Used with -a list.

208

Promise

Technology

VTrak D5000 Series Product Manual

Summary of Contents for VTrak D5000 Series





















































































































































































































































Search results

Summary of Contents for VTrak D5000 Series

Reviews:

Related manuals for VTrak D5000 Series

Brands by name

Popular brands

Promise Technology VTrak D5000 Series, Product Manual

Search results

Summary of Contents for VTrak D5000 Series

Reviews:

Related manuals for VTrak D5000 Series

Brands by name

Popular brands