Back left rail secured to post
Press lever to release lock (front right)
2. Secure the rails to the rack posts. Make sure the rack rails are properly oriented in the rack.
To set the rails into the rack posts and secure the rails, follow these steps:
a. Press the spring lock then insert the studs into the selected square holes on the rack post.
b. Press the spring lock on the other end of the rail and insert the studs into the selected mounting hole on the
rack post. If necessary, extend the rail to reach the post.
c. Use the rail screws to anchor the rack rail to the post.
d. Make sure the rack rail is aligned, secure, stable and in the correct place.
e. Perform steps a through c above for the other rail.
f.
Make sure the rack rails are aligned, secure, stable and in place. See figure below.
20
Promise
Technology
VTrak D5000 Series
