Promix-SM306
7
The lock does not need lubrication!
The warranted operation period is 12 months from the date of sale but not
longer than 18 months from the day of acceptance by the manufacturer’s QCD.
The latch roller does not enter the snap
slot, or enters with friction.
Restore position of the door that changed in the
course of operation. If restoration is impossible,
adjust the latch (see 6.1)
The door is not opened when transferred to
the “open” state. To open the door, one has
to press it more snugly to the door frame.
Remove the causes of the non-tight door bearing
against the door frame.
Adjust the latch in the horizontal plane.
9.
MAINTENANCE
Maintenance of the lock is performed at least once every two months and includes:
Visual inspection of the lock to check reliability of fastening. If necessary, tighten fasteners
of the lock and the latch.
Checking the proper position of the latch. (see section 8).
10.
STORAGE AND TRANSPORTATION
Prior to putting into operation, the locks must be stored in the manufacturer’s packing, in
rooms with an ambient temperature
of -
30 to +50 °С
and a relative humidity not higher than 98%
at 25º С in compliance with storage conditions as per GOST 15150-69.
Locks transportation conditions must comply with group C as per GOST 23216-78 in terms of
exposure to mechanical factors,
and Ж2 as per GOST 15150-69 in terms of exposure to climatic
factors.
11.
SAFETY REQUIREMENTS
The design of the locks ensures safety of personnel involved in mounting and maintenance.
Due to low DC supply voltage, the products correspond to class III as per ГОСТ 12.2.007.0-
75 and are electrically safe.
Fire safety of the locks is ensured by use of non-combustible or hardly combustible materials,
and low supply voltage.
12.
DISPOSAL
The product is not hazardous for human life and health or for the environment; disposal after
its service life is performed without taking any special measures for environment protection.
13.
WARRANTY LIABILITIES
The manufacturer, ETC PROMIX LLC, warrants conformity of Promix-SM306 locks to
requirements of current Technical Specifications provided that transportation, storage, installation
and operation rules established in this Manual are followed.
