3
Fig.2. Mounting the lock on the door frame profile
Fig.3. Mounting the deadbolt in the notch of the door profile
5.2 Adjusting the deadbolt position:
It is necessary to adjust the deadbolt position in such way that when the door is
closed, the deadbolt roller enters into the lock groove until full operation of the fixation
device.
For adjusting in the vertical direction, loosen the screws 5 and move the deadbolt (see
Fig. 3).
For adjusting in the horizontal direction, unscrew the screws 6, move the deadbolt,
screw the screws 6 in the necessary holes.
In case when the clearance between the door and the door frame more than the
standard 12mm (the deadbolt does not reach the lock groove), between the bracket and the
plate of the deadbolt it is necessary to mount one or several gaskets (see Fig.4).
Fig.4. Mounting the gaskets
2
5
6
6
5
Gasket
