3. Operation
49
If necessary, the robot can carry out automatic recharging on a
schedule, you can enable this mode in the settings.
In the event that the use of automatic charging is impossible or
difficult, the battery can be charged using the power port on the back of
the robot.
3.6. Transportation
To carry out safe transportation of the robot, it is necessary to de
-
energize it by switching the power break switch to the "off" position.
This switch is located at the bottom of the torso of the robot under the
body on the left side. For safe transportation, use a special trunk,
equipped with a lodgment and a bracket. Before transporting, secure the
robot in the trunk with a bracket.
1.
Contacts for connection to the charging station;
2.
Power button;
3.
Fuse button.
Fig.3.25.
