STEP 1 - ATTACH TRIPOD MOUNTING PLATE
The ProLine 15/17’s patent pending mounting system allows the use of any size/weight camera. This mounting
system allows the tripod mounting plate to be attached to either the upper rail or lower rail of the teleprompter.
For heavier cameras mounting the tripod plate to the upper rail has the added benefit of lowering the center of
gravity for improved tripod head operation. In addition, the tripod mounting plate can slide anywhere along the
rails for precise balancing.
For lighter cameras the
tripod mounting plate is
attached to the lower rail.
For heavier cameras the
tripod mounting plate is
attached to the upper rail.
Tripod plate slides into channel on
either upper or lower rail.
Loosen thumbscrews
and lift up retaining
plate on back of upper
rail to slide on tripod
mounting plate.
Slide tripod mounting plate front
to back to balance teleprompter
Tighten screws to secure
tripod plate. Screws can be
tightened with a coin or
screwdriver.
The tripod mounting plate offers both
1/4” and 3/8” industry standard
mounting holes. Attach this plate to
your tripod’s quick release plate.
1
Revised 042009
Flex 15/17/19 Set-Up Sheet
