background image

For more exciting multitouch products visit

www.promultis.info

or call +44 (0) 239 251 2794

MULTITOUCH SOLUTIONS

touch

screen

6

Screen Cleaning

Over time and use the screen will 

become tarnished with finger prints; 

 

to clean a mist spray class cleaner / 

 

degreaser should be used when the 

screen is at a 45 degree angle. Should 

any liquid be dropped on the screen 

when it is in the horizontal position this 

should be mopped up with a liquid 

absorbent cloth prior to cleaning.

Operation Guidance

When using the screen the gesture 

functions are similar to using your 

smartphone or tablet but on a much 

larger scale. 

The way Projected Capacitive touch 

technology works is by fixing a sensor grid 

between a layer of cover glass and the 

LCD panel, so when a finger touches the 

glass the grid detects the coordinates of 

the touch point. 

With this type of technology no recessed 

bezel is required so our Projected 

Capacitive Touch Screens have a strong 

tempered edge-to-edge glass front for a 

more striking display. From easy cleaning 

to smooth gesture recognition Projected 

Capacitive is the definitive touch 

technology.

Summary of Contents for Tab Boxtop Series












Reviews: