6
BASIC OPERATIONS
How to adjust the height
1. The height adjustment buttons are located at
the back of the unit. There are 2 triangles,
each pointing in the respective direction of
movement. Press the arrow pointing up, to
increase the height, and the arrow pointing
down, to lower the height.
1. Loosen the thumb wheel on the side of the unit. Please note:
Only unscrew the wheel by a few turns, if you loosen it too
much, it can cause the screen to drop unexpectedly, possibly
causing damage to the unit.
2. Make sure you have one hand holding the bottom of the
screen, to support it in the case of it tilting too quickly. Once
you are supporting the screen, pull out the plunger pin on the
other side of the unit. You can now tilt the screen to the desired
angle.
3. Once you have moved the screen to the desired angle, keep a
hold of the screen and release the plunger pin to allow it to
snap back into place. Please note: You may have to adjust the
position of the screen slightly for the plunger pin to align up with
a locking hole. Do not let go of the screen until the plunger pin
has fallen back into place.
4. Once the plunger pin has locked back into place, let go of the
screen and tighten the thumb wheel back up to prevent
accidental tilting
How to adjust the angle of the screen
