PRONOVA FOS/TAC 2000, User Manual

FOS/TAC 2000 

SAFETY DATA SHEET H2SO4 

812-04.2015-EN 

FOS/TAC 2000 User Manual 

29 

Trade name:  

SULPHURIC ACID 0.05 mol/l - 0.1 N  

volumetric standard solution 

according to Regulation (EC) No. 1907/2006 

page 3/5 

8   Exposure controls/personal protection  

 
· Additional information about design of technical facilities: 

No further data; see item 7. 

 
· Ingredients with limit values that require monitoring at the workplace: 

The product does not contain any relevant quantities of materials with critical values that 

have to be monitored at the workplace. 

· Personal protective equipment: 
 
· General protective and hygienic measures:   
 

Avoid close or long term contact with the skin. 

Keep away from foodstuffs, beverages and feed. 

Immediately remove all soiled and contaminated clothing. 

Wash hands before breaks and at the end of work. 

Avoid contact with the eyes and skin. 

 
· Individual protection measures:  

Protective clothing needs to be selected specifically for the workplace, depending on  

concentrations and quantities of the hazardous substances handled. The chemical resistance 

of the protective equipment should be enquired at the respective supplier. 

· Respiratory protection:    

Required when vapours/aerosols are generated. 

· Protection of hands: 

Protective gloves:    

The glove material has to be impermeable and resistant to the product/ the substance/ the 

preparation. Selection of the glove material on consideration of the penetration times,  

rates of diffusion and the degradation 

Material of gloves:   

Nitrile, thickness: ≥ 0.11 mm 

The selection of the suitable gloves does not only depend on the material, but also on further 

marks of quality and varies from manufacturer to manufacturer. As the product is a  

preparation of several substances, the resistance of the glove material can not be calculated 

in advance and has therefore to be checked prior to the application. 

Penetration time of glove material:  

Value for the permeation: Level ≥ 6 

The exact break through time has to be found out by the manufacturer of the protective  

gloves and has to be observed.  

 
· Eye protection:   

Tightly sealed goggles 

 
 
· Body protection:  

Protective work clothing  

9   Physical and chemical properties 

 
· General Information: 

Form:    

Fluid 

Colour:    

Colourless 

Odour:    

Odourless 

 
· Change in condition: 
 

Melting point/Melting range:  ~0°C 

Boiling point/Boiling range:   ~100°C 

· Vapour pressure at 20°C:  

23 hPa 

· Density at 20°C:  

1.002 g/cm³