background image

- 5 -

Figure 1

MODEL:

"

SERIAL NO:

"

DATE OF PURCHASE:

"

INTRODUCTION

NOW

 take a moment to enter the model, serial

number and the date of purchase of your Trailer in the
space provided below.

When ordering parts from your Dealer, please refer to
these numbers for a fast and efficient service.  Use
PRONOVOST parts for replacement.

The model and serial numbers are on the name plate
shown on Fig. 1.

Thank you for choosing PRONOVOST.  We are
confident this equipment will meet your requirements
in terms of quality, performance and reliability.

This manual was prepared to assist you in the safe
operation of your new Dump Trailer.  It contains
important information which will help you achieve
excellent returns with your PRONOVOST Dump
Trailer for years to come.

Please read this manual before operating your Trailer
and keep it for future reference.

Before using this equipment, you or any other person
who will be using it must familiarize yourself with the
safety recommendations, the operating and safety
instructions.  Please read carefully and be sure to
understand and follow all recommendations and
procedures.

In this manual, the right and left sides are identified
while standing at the rear end of the equipment and
facing it.

If you require additional information on your Dump
Trailer, please contact your PRONOVOST Dealer.

CONGRATULATIONS!

1

Summary of Contents for PUMA-LP12





























Reviews: