ZIPP NANO™2.0 WARNING
:
The ZIPP NANO™2.0 is designed for INDOOR and OUTDOOR use.
The ZIPP NANO™2.0 blades revolve at high speeds
and can cause damage to the user, spectators and animals. Stand away from the ZIPP NANO™2.0 to reduce the risk of
getting into the flight path. Warn spectators that you will be flying your ZIPP NANO™2.0 so that they are aware of its
position. Before flight, inspect the rotor blades to make certain that the blades are securely fastened to the ZIPP NANO™2.0.
WARNING!
• Choking/Cutting Hazard. Small Parts/Sharp Rotor Blades.
• Keep hands, hair and loose clothing away from the propeller when the power switch is turned to the ON position.
• Turn off the transmitter and ZIPP NANO™2.0 power switches when not in use.
• The included charger is built specifically for the ZIPP NANO™2.0 Li-Poly battery. Do not use it to charge any other battery.
• New alkaline batteries are recommended for maximum performance.
• Parental supervision recommended when flying ZIPP NANO™2.0.
BATTERY WARNINGS
R
ECHARGEABLE BATTERY:
This ZIPP NANO™2.0 uses a Li-Poly rechargeable battery. If battery no longer stays charged, dispose of battery properly
according to local disposal requirements.
CONTROLLER BATTERIES:
Remote control requires 2 “AAA” batteries (included). Please read the important battery safety warning below.
• Do not mix alkaline, standard (carbon-zinc) and rechargeable batteries (nickel metal hydride).
• Do not mix old and new batteries.
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the item before being charged (if removable).
• Rechargeable batteries are only to be charged under adult supervision.
• Exhausted batteries should be removed immediately and must be recycled or disposed of properly
according to state or local government ordinances and regulations.
• The supply terminals are not to be short-circuited.
• Only batteries of the same or equivalent type as recommended are to be used.
• Batteries are to be inserted with the correct polarity (see inside booklet for diagram).
• Do not dispose of batteries in a fire - batteries may leak or explode.
CARE AND MAINTENANCE
• Always remove the batteries from the wireless infrared remote control when it is not being used for an extended period
of time.
• To clean, gently wipe the remote control and ZIPP NANO™2.0 with a clean damp cloth.
• Keep the toy away from direct heat or sunlight.
• Do not submerge the toy into water. This can damage the unit beyond repair.
• Parental guidance recommended when installing or replacing the batteries.
HOW TO DO 360º STUNT ROLLS
1. In order to make your ZIPP NANO™2.0 do 360º rolls you must fully charge your battery.
Note: The ZIPP NANO™2.0 will not do 360º stunt rolls in T-Mode, Mode 1 or under low battery
indication (The LED lights on the drone will be flashing).
2. Once you are ready to attempt a 360º roll, simply depress and let go of the "STUNT" button on the top
right hand side of your controller (see Remote Diagram on page 3); you will hear a sound. This means
you are now in “STUNT MODE."
3. Now quickly move your right control stick in any of 4 directions; up, down, left or right. Your Zipp
Nano™ copter will instantly roll in the associated direction. See diagram below.
E
Back
REPLACING THE PROPELLER BLADE
Your ZIPP NANO™2.0 propeller system is a precision instrument that may need repair or replacement from
time to time for optimal flight function. Crash landing from high-speed aerial flights may cause damage
to your ZIPP NANO™2.0 propellers.
1. The ZIPP NANO™2.0 has four blades: one A and one B blades on front, and one B and one A blades on back
(see diagram E).
2. Pick up a blade from the included spare parts and match
the marking to diagram E.
3. Replace the broken blade with the correct spare blade.
9
10
Front
A
B
B
A
A
L
360˚Stunt Roll
M
