Propeller Blade
Camera
Li-Poly Battery Compartment
CLOUD RIDER™ HD 2.0 QUADROCOPTER DIAGRAM
CLOUD RIDER™ HD 2.0 REMOTE DIAGRAM
3
4
FLIGHT PREPARATION
• Verify that there are 6 “AA” batteries inside the remote control unit and the Cloud Rider™ HD 2.0 battely
has been fully charged.
• Make sure your Cloud Rider™ HD 2.0’s and controller battery is inserted turned on.
• Make sure to be in a large space with an open radius of at least 200 feet.
• Make sure the empty space has no obstacles. Set your Cloud Rider™ HD 2.0 on a clean flat level surface before
take-off.
DO NOT ATTEMPT TO FLY YOUR Cloud Rider™ HD 2.0 IF THERE IS RAIN, SNOW, HEAVY WINDS, THUNDER OR
LIGHTNING OUTDOORS. IT COULD DAMAGE YOUR PRODUCT AND POSSIBLY EVEN CAUSE BODILY HARM.
SYNCING YOUR CLOUD RIDER™ HD 2.0
Important! When syncing your Cloud Rider™ HD 2.0 quadrocopter with the controller always make
sure that the quadrocopter is on a flat level surface and that your digital trim settings are in the
center position. This insures that the 6 Axis gyro is properly programmed to mimic your trim
settings.
Your Cloud Rider™ HD 2.0 utilizes an automatic 2.4G channel selection system that allows up to 8 people to
fly side by side in the same wireless range with no interference.
Syncing your aircraft:
1. Before starting, make sure that the power switch on your controller is in the OFF position and the Cloud Rider™ HD 2.0
battery is not inserted. Make sure that there are no other 2.4Ghz devices in the area as well .
2. Insert the battery into the compartment in the correct orientation and set it down on a flat level surface.
The led indicator lights under the rear arms of the Cloud Rider™ HD 2.0 shoud begin to flash (see diagram D).
3. Next turn ON the remote controller. After hearing a series of beeps, the Cloud Rider™ HD 2.0's flashing
LED lights will start flashing at a slower rate. Pull the throttle (left control stick) all the way up and then
all the way down.The LED lights will flash rapidly for a few seconds and then stay soild. You are now
ready to fly the Cloud Rider™ HD 2.0. If this does not happen, repeat all steps above.
FLYING TIPS
• It is recommended that you operate the Cloud Rider™ HD 2.0 outdoors in a wide space. The ideal space
should have a 200 foot radius.
• Parental guidance or adult supervision is suggested at all times.
• If you are flying the Cloud Rider™ HD 2.0 with others, make sure all spectators are behind you.
• For best performance, it is recommended that you operate the Cloud Rider™ HD 2.0 in zero wind
conditions. Wind can greatly affect the performance of the aircraft or cause injury.
DO NOT FLY YOUR CLOUD RIDER™ HD 2.0 IN FOUL WEATHER!
WARNING
Speed Setting
Throttle & Spin
Left/Right
Right/Left Spin
Trim Adjustment
Power Switch
Power Indicator
Antenna
360º Stunt Button
Camera/Video
Forward/Backward
Bank Left/Right
Forward/Backward
Trim Adjustment
Bank Right/Left Trim
Adjustment
FRONT
REAR
D
Auto Sart/Land Button
