NOTE: The use of the Trim buttons are accompanied with a Beep tone. A single long Beep indicates the
product is center trimmed. Continuous long Beeps indicate the product is trimmed to the maximum on a
particular side.
UNDERSTANDING TRIM ADJUSTMENTS
Turn Left/Right Trim
�• If your Quadrocopter nose rotates to the left or right uncontrollably, you may need to utilize the
DIRECTION TRIM buttons.
• If your Quadrocopter over rotates CLOCKWISE (to the right), push and release the DIRECTION TRIM
button repeatedly to left side until the turning stops and proper flight is maintained.
• If your Quadrocopter over rotates COUNTER-CLOCKWISE (to the left), push and release the DIRECTION
TRIM button to right side in the same manner until the problem is resolved.
• From time to time you may have to adjust the DIRECTION TRIM to left and right to ensure the
Quadrocopter will fly straight and respond accurately to control commands.
Forward/Backward Trim
�• If your Quadrocopter is moving forwards or backwards automatically, you may need to adjust the
FORWARD/BACKWARD TRIM buttons.
•�If your Quadrocopter flies forward, push and release the FORWARD/BACKWARD TRIM button
back/down repeatedly until the moving stops and proper flight is maintained.
•�If your Quadrocopter flies backwards, push and release the FORWARD/BACKWARD TRIM button
forward/up in the same manner until the problem is resolved.
• From time to time you may have to adjust the FORWARD/BACKWARD TRIM to ensure the
Quadrocopter will hover in mid-air and respond accurately to your commands.
Banking Left/Right Trim
�• If your Quadrocopter is not steadily hovering and is banking to the left or right automatically, you
may need to adjust the BANKING TRIM buttons.
•��If your Quadrocopter banks to the left, push and release the BANKING TRIM button repeatedly to the
right until the banking stops and proper flight is maintained.
•��If your Quadrocopter banks to the right, push and release the BANKING TRIM button to the left in the
same manner until the problem is resolved.
• From time to time you may have to adjust the BANKING TRIM to left/right to ensure the Quadrocopter
will steadily hover in mid-air and respond accurately to your commands.
Throttle Sensitivity Trim
• If you find the throttle is too sensitive when you fly the Quadrocopter, you may need to utilize the
Throttle sensitivity trim.
• Push the Throttle sensitivity trim button back to lower the sensitivity of the throttle. Push the
Throttle sensitivity trim button forward to increase the sensitivity of the throttle. The middle
position is recommended for beginners.
SPEED SELECT BUTTON
The Quadrocopter has 5 speed settings, the initial setting is 20%, Press the SPEED SELECT button on the
top left of the remote control and your Quadrocopter will change to 40%, 60%, 80% and 100% speed.
im
Direction Trim
It over rotates to the right…
Direction Trim Controls
Push to left
Push to right
It over rotates to the left…
d
Forward/Backward
Trim
Forward/Backward
Trim Controls
Push down to
go backward
If flying forward...
If flying backward...
Push up to
go forward
4 CH Left/Right Banking
Controls
Push to right to
increase right banking
sensitivity
Push to left to
increase left banking
sensitivity
Banks Trim
5
6
