V4.0
250 LB LADDER RACK
8819435
Visit www.princessauto.com for more information
5
2.1 Check the weld points for cracking or metal fatigue.
3. Do not exceed the rack’s maximum capacity (see
Specifications).
4. Secure the load with straps to prevent unwanted
movement that can cause the load to slide, fall off the arm
or vibrate.
5. Check all bolts and connections for tightness daily. Tighten
the bolts when necessary.
6. Avoid overloading the ladder rack. Distribute the load
evenly across both racks. Overloading can make the vehicle
top-heavy and may cause a vehicle roll over during turns,
stops or strong winds.
7. When extending the arms, be sure to leave 2-1/2 in. of the
tube in the frame to prevent the arm from falling out.
8. Be aware of the overall height of the load on the vehicle to
avoid striking low overhead structures.
9. Do not load the racks in a manner that will block or obscure
your view of the road or surroundings while driving.
10. Only load a vehicle on a firm, level surface capable of
sustaining the load. Never load the racks on a vehicle
resting on a sloped or soft surface, as the load may shift or
fall and injure you or a bystander.
11. Only use manufacturer accessories with the ladder rack.
Using an accessory not designed for the ladder rack may fail
and injury you or a bystander.
UNPACKING
WARNING! Do not operate the tool if any part is missing.
Replace the missing part before operating. Failure to do so
could result in a malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect
for damage. Make sure that all items in the parts list are included.
