V1.0
CONTRACTOR TRUCK RACK
8819450
Visit www.princessauto.com for more information
5
4. Secure the load with straps to prevent unwanted movement
that can cause the load to slide, fall off the arm or vibrate.
5. Check all bolts and connections for tightness daily. Tighten
the bolts when necessary.
6. Avoid overloading the rack. Distribute the load evenly.
Overloading can make the vehicle top-heavy and may cause
a vehicle roll over during turns, stops or strong winds.
7. Be aware of the overall height of the load on the vehicle to
avoid striking low overhead structures.
8. Do not load the racks in a manner that will block or obscure
your view of the road or surroundings while driving.
9. Only load a vehicle on a firm, level surface capable of
sustaining the load. Never load the racks on a vehicle
resting on a sloped or soft surface, as the load may shift or
fall and injure you or a bystander.
10. Only use manufacturer accessories with the rack. Using an
accessory not designed for the rack may fail and injury you or
a bystander.
UNPACKING
WARNING! Do not operate the tool if any part is missing.
Replace the missing part before operating. Failure to do so
could result in a malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect
for damage. Make sure that all items in the parts list are included.
ASSEMBLY & INSTALLATION
Numbered references in parenthesis (#1) refer to the included
Parts List.
ASSEMBLY
Prepare five open-end wrenches: one 17 mm, two 18 mm and
two 24 mm.
