Propur PP500 - IC, Installation And Operating Instructions Manual

10.  Remove the sanitary cover from the cap.  Ensure the 

fi

lter mount O

‐

rings are 

protruding from the top of the Cap.    Unscrew the Cap from the sump.  The   

fi

lter mount will s ll be a ached to the cap at this  me.  Take protec ve      

wrapping o

ff

 of the 

fi

lter cartridge and place into the sump.  Proceed to thread 

the Cap (with 

fi

lter mount s ll a ached) back onto the sump un l  ght.      

Moisten the O

‐

rings with water.  DO NOT use any          

petroleum  products to lubricate. 

11.  Align assembled 

fi

lter with the lugs on the cap end    

facing the front and back of the head.  Push the cap end 
into the head and then proceed to twist the assembly 
clock

‐

wise 90 degrees to seal. ( A Quarter Turn).       

    The 

fi

lter is now installed. 

12.Turn on the cold water supply valve and open the fau

‐

cet to 

fl

ush air from the  system.  Run water for 2

‐

3 

minutes to pre

‐

condi on the 

fi

lter.  Close the faucet.  

The system is now under pressure and can be inspected 
for leaks.   

Repair any leak before con nuing use. 

13.Flush the system twice for 2

‐

3 minutes before ini al 

use.