Setting up your Propur
TM
Knob handle
Lid
Upper container
Filter elements
Plug(s) for unused
filter hole(s)
Lower container
Spigot
Non-slip pad
What Your
Propur
™ System Includes:
1 - Upper container
1 - Lower container
1 - Spigot, 4-washers and nut
1 - Lid, knob with hardware
1 or 2 - Filter element(s), wing
nut(s) and washer(s)
Filter hole plug(s): 0 -TRAVELER,
1 - NOMAD, 1 - BIG, 2 - KING
1 - Non-slip pad
1 - Scrubby sponge
For cool or cold water use only.
Propur
™ Systems are made from imported and domestic components manufactured to
Propur
™ specifications and standards and assembled in Commerce Twp, Michigan USA. For
the latest information and instructions on assembling and maintaining
Propur
™ products,
please visit www.propurusa.com.
Cleaning
Cleaning your system
1) Wash your hands.
2) Use liquid dish washing soap along with the yellow side of
the enclosed scrubby sponge to clean the stainless steel parts of
your unit. Rinse well.
Warning:
Do not use rough side of sponge on stainless steel system.
Cleaning your filters
1) Wash your hands.
2) Remove the filter(s) from packaging.
3) Hold the filter(s) by the plastic base. Run the ceramic under cool
running water.
4) Scrub the filter with the rough (green) side of scrubby sponge.
Rinse well.
Warning:
Do not use any soap on the filter.
Do not allow water to go up the stem of the filter.
5) Lay filter(s) on side until ready to install.
5
