4. Upright Positioning
Position the upright so that one pair is lined up in the forward part of the truck bed and one pair is lined up in the rear portion of the truck bed.
For best results, use a tape measure for accurate alignment.
ProRac Systems Inc. Toll Free: 1-800-217-7133
1800 Freeway Blvd Phone: 763-546-5620
Minneapolis, MN 55430-1708 Fax: 763-546-0933
Page 3 of 5 WWW.PRORAC.COM
5. Rack assembly 1
Orientate the crossbar so the flat side is facing down.
Start with the crossbar closest to the cab. Lift the backing plates up
by pressing upwards on the ¾” button head screws.
Slide the crossbar so the backing plates slide into the lower channel
of the crossbar.
6. Rack Assembly 2
Continue to slide the load bar through the upright assembly until the
load bar is at the opposite upright assembly.
