30
31
• The device is only for private use and is not intended for medical or commercial
purposes.
• The manager is not responsible for damage or injury caused by improper or
incorrect use.
• The appliance must be checked frequently for signs of wear or damage. If
such signs are present, or if the appliance has been used improperly, it must
be taken to either the manufacturer or the dealer before further use.
• Switch off the instrument immediately in the event of defects or malfunctions.
• Repairs may be carried out only by the customer service or authorized dealers.
• On no account try to repair the instrument yourself!
• Use the instrument only with the accessories provided.
• Never leave the instrument unattended when it is in operation.
• Keep the instrument away from children to prevent any possible danger.
• Keep the instrument away from sources of heat.
• Do not use the instrument under blankets, pillows etc.
• The instrument must not be operated continuously for longer than 15 minutes.
After this time, wait an interval of at least 30 minutes to prevent the motor
from overheating.
• Do not use the instrument when bathing or showering. Do not store or keep
the instrument in places from where it could fall into a bath or wash basin.
• Never immerse the instrument in water or other liquids.
• If the instrument has dropped into water, unplug the plug-in power unit im-
mediately.
• Ensure your hands are dry before handling either the instrument or the plug-in
power unit.
• Do not pull on the power cord or instrument to unplug the plug-in power unit
from the socket outlet.
• The plug-in power unit must be operated only from a power supply as specified
on it.
• If the power supply is damaged, don‘t use the adaptor anymore!
• For reasons of hygiene, the device should only be used on one person.
Manicure/pedicure device
+/- speed regulation
Clockwise/anti-clockwise rotation
LED light
Operating indicator
On/off switch
OPERATION:
• The manicure-pedicure unit DELUXE is provided with a transformer
and is connected to the power supply system.
• By pressing the respective buttons speed and direction can be con-
trolled.
• The replacement of the components is simple because the set is
equipped with an automatic connector.
• To attach an accessory part you must insert it and simultaneously
turn it slightly. When replacing it you must just pull it forward.
5. Device description
