32
33
After use, before cleaning and changing any accessory parts, the power
unit should always be disconnected. Ensure that the sliding switch on the
device is in the centre position (= off) before you connect the device to a
power supply.
!
This manicure and pedicure device comes with high-quality attachments. The
supplied 10 attachments are made with durable sapphire coating / polishing
felt. Together with the continuously adjustable speed regulation and right/left
rotation, professional foot and nail care at the standard of a pedicurist is pos-
sible. All the attachments can be easily integrated into the storage pouch of
the device. The integrated LED light additionally creates ideal light conditions
during application.
• This instrument is intended only for the treatment of hands (manicure) and
feet (pedicure).
• Make sure that the device is switched off beforehand.
• Select an attachment and push it onto the instrument spindle using a
slight pressure. The attachments can be heard to engage. To remove: pull
the attachment and instrument apart in the axial direction (straight).
• Turn the control ring to the left (anti-clockwise rotation) or to the right
(clockwise rotation) to switch the device on. The LED lights up blue. The
two buttons marked with plus (+) and minus (-) allow you to select the
speed of rotation. Start every application at low speed and increase it only
as required.
• All file and cutting attachments are coated with a sapphire grain. This
guarantees extremely long life and almost guarantees freedom from wear.
• Do not exert heavy pressure and always guide the attachments carefully
over the surface to be treated.
6. Commencing operation
7. Application
Important:
Check the results during treatment. This is particularly important for dia-
betics, since their hands and feet are less sensitive.
!
• Move the instrument under light pressure in circular movements slowly
over the parts to be treated.
• Note that the cutting attachments will have a reduced effect if the skin is
softened or moist. For this reason, do not carry out any pretreatment in a
bath.
• Do not remove all the callus skin in order to retain the natural protection of
the skin.
• Always ensure that the spindle can rotate freely. It must never be perman-
ently jammed, otherwise the instrument will become too hot and suffer
damage.
• After every use, apply moisturizing cream to the parts treated.
Attachments
Since the attachments are of a high quality and improper use can lead to inju-
ry, we ask that you handle the attachments carefully. At high speeds in parti-
cular, we advise that you proceed with caution.
