2. Prior to Use
Before using, always check the package included
in the delivery :
1x Device
1x Self –Adhesive Pad
1x 3V CR2032 Battery
2.1 Insert battery in the correct direction (+ Up).
To check that the battery has been fitted correctly
please press the
ON/UP button
once and the led
willgo blank. Having made this check press the
OFF/DOWN button
to switch the unit off.
2.2 Place the electrode with the contact plugs up
onto a flat surface. Place the device with the
contact jacks down onto the Electrode pad so
that plugs and jacks are aligned. Then press down
until completely snapped in.
Do not remove the clear plastic shield from
electrode until the unit is ready to be placed on
the body.
2.3 Ensure that whenever you intend to place the
electrode, the skin is clean and thoroughly dry.
2.4 For treatment you can now remove the plastic
shield from electrode by holding the edge of
electrode in turn, then peeling off the clear plastic
shield. Do not discard it!
11
