26
27
Technical Specifications
Notes on Electromagnetic Compatibility
WARNING!
The device is suitable for use in all environments listed in these instructions for use,
including domestic environments. The use of the device may be limited in the presence
of electromagnetic disturbances. This could result in issues such as error messages or
the failure of the display/device. Avoid using this device directly next to other devices
or stacked on top of other devices, as this could lead to faulty operation. If, however,
it is necessary to use the device in the manner stated, this device as well as the other
devices must be monitored to ensure they are working properly. The use of accessories
other than those specified or provided by the manufacturer of this device can lead to
an increase in electromagnetic emissions or a decrease in the device’s electromagnetic
immunity; this can result in faulty operation. Keep portable RF communication devices
(including peripheral equipment, such as antenna cables or external antennas) at least
30 cm away from all device parts, including all cables included in delivery. Failure to
comply with the above can impair the performance of the device. Failure to comply
with the above can impair the performance of the device.
Disposal
For environmental reasons, do not dispose of the device in the household
waste at the end of its useful life. Dispose of the unit at a suitable local collec-
tion or recycling point. Dispose of the device in accordance with EC Directive –
WEEE (Waste Electrical and Electronic Equipment). If you have any questions,
please contact the local authorities responsible for waste disposal.
Channel :
Dual, isolated between channels.
Pulse Rate :
As pre-programmed, in operation mode.
Pulse Width :
As pre-programmed, in operation mode.
Timer :
5~60 min. selectable.
Wave Form :
Symmetrical Bi-Phasic square pulse.
Max Charge per Pulse :
20.8 micro-coulombs maximum.
Input rating:
5Vdc, 1.2A
Power Source :
Battery 3.7V /260 mAh Lithium polymer (LiPo) battery,
model no. WL-303032
AC Adaptor I/P:
100-240Vac, 50/60Hz, 0.45A; Output: 5Vdc, 1A
Dimension & Weight
(battery included) :
125.5x51x17.5 mm; 76.0g.
Operating Conditions:
+ 50°F (10°C to +104° (40°C), 40-90% max. Relative
humidity
Transport and Storage
Conditions:
+14°F (-10°C) to +140° (60°C), 30-95% max. Relative
humidity
Operation altitude:
3000m.
Operating Atmospheric
pressure range:
700~1013 hPa
Transport and Storage
Atmospheric pressure
range:
500~1060 hPa
Note
The codes below are printed on batteries containing harmful substances: Pb = Battery
contains lead, Cd = Battery contains cadmium, Hg = Battery contains mercury.
