26
27
Technical Data
Notes on electromagnetic compatibility
WARNING!
The device is suitable for use in all environments listed in these instructions
for use, including domestic environments.
The use of the device may be limited in the presence of electromagnetic dis-
turbances. This could result in issues such as error messages or the failure
of the display/device. Avoid using this device directly next to other devices
or stacked on top of other devices, as this could lead to faulty operation. If,
however, it is necessary to use the device in the manner stated, this device
as well as the other devices must be monitored to ensure they are working
properly.
The use of accessories other than those specified or provided by the manu-
facturer of this device can lead to an increase in electromagnetic emissions or
a decrease in the device’s electromagnetic immunity; this can result in faulty
operation.
Keep portable RF communication devices (including peripheral equipment,
such as antenna cables or external antennas) at least 30 cm away from all
device parts, including all cables included in delivery. Failure to comply with
the above can impair the performance of the device. Failure to comply with
the above can impair the performance of the device.
Disposal
WARNING!
The empty, completely flat batteries should be disposed of through specially
designated collection boxes, recycling points or electronics retailers. You are
legally required to dispose of the batteries. *
For environmental reasons, do not dispose of the device in the hou-
sehold waste at the end of its useful life. Dispose of the unit at a
suitable local collection or recycling point. Dispose of the device in
accordance with EC Directive – WEEE (Waste Electrical and Electronic
Equipment). If you have any questions, please contact the local aut-
horities responsible for waste disposal.
** A
ll elec
tr
ical specifica
tions ar
e ±20%
Channel:
Dual, isolated between channels.
Output Voltage:
0~40V peak into 500Ω load each channel.
Pulse Amplitude:
Adjustable 0 – 80mA.
Pulse Rate:
As pre-programming operation mode.
Pulse Width:
As pre-programming operation mode.
Software ramp up feature:
Pulse width ramp up when change mode.
Timer :
5~60 min. selectable.
LCD: Show modes, pulse rate, pulse width, timer, CH1/CH2, intensity level.
Wave Form:
Symmetrical Bi-Phasic square pulse.
Max Charge per Pulse:
20.8 micro-coulombs maximum.
Operating Conditions:
+ 50°F (10
°C
) to +104° (40
°C
), 40-90% max.
Relative humidity
Transport & Storage Temperature:
+14°F (-10
°C
) to +140° (60
°C
), 30-95% max.
Relative humidity
Weight:
120 g (battery included)
Dim. :
122 x 66 x 30 mm
Power Source:
3 x AAA / 4.5 Volt batteries
*Note
The codes below are printed on batteries containing harmful substances: Pb = Battery
contains lead, Cd = Battery contains cadmium, Hg = Battery contains mercury.
