20
Selecting the program
Press MODE after treatment mode is set.
1. To choose Program (P1~P8), use Up + (to increase) or the button Down – (to
decrease).
2. Program P9, it is self –programmable mode. To set up desirable pulse width
between 50~260uS and frequency at 2~60Hz (for TENS) and 7~70Hz (for EMS) :
2.1. Press Mode button, the preset (default) Pulse Width is then fl ashing.
Press the button Up + (to increase) or the button Down – (to decrease) for choice
of the selected Pulse Width .
2.2. Press Mode button again, the preset (default) Pulse Rate is then fl ashing.
Press the button Up + (to increase) or the button Down – (to decrease) for
choice of the selected Pulse frequency.
3. Press MODE again to save your selection. The treatment program you selected
will appear on the display the next time you turn the device on.
➠
➠
