PT-1136 User’s Manual
www.prokits.com.tw
6
LED Light
The machine has a built in LED light; it is convenience for working in dark environments. The
LED light switch is at the top of handgrip. Simply slide the switch on and off as required when
needed. Turn off when not needed so as to save battery life.
Operation for working
Only use tool bits which can be securely fastened in the chuck and for which the bits has been
designed.
Before using the machine check whether the screw-bit is inserted correctly. Avoid over-tightening
screws, otherwise the screw head may be damaged or stripping of the threads may occur.
Screw-bit Insertion
Insert the screw-bit into the slot in the head of the screw. Hold the screw bit perpendicular to the
head of the screw, otherwise the screw or the screw head may be damaged. Press the forward
button, the screw bit against the screw and driving in the screw into work-piece. When the screw
is completely screwed in, hold the machine firmly and release switch, otherwise the screw or the
screw head may be damaged.
Screw-bit Removal
Insert the screw-bit into the slot in the head of the screw. Hold the screw-bit perpendicular to the
head of the screw, otherwise the screw or the screw head may be damaged. Press the reverse
bottom, screw bit against the screw and removing the screw.
Maintenance and Clean
To clean the power tool, always use a dry or moist, but not wet towel. Many cleaning agents
contain chemical substances which may cause damage to the plastic parts of the machine.
Therefore do not use any strong or inflammable cleaners such as petrol, paint thinner, turpentine
or similar cleaning agents.
Always keep air ventilation holes free of dust deposits to prevent overheating.
Service
For more information on PT-1136A / PT-1136F and other products, please visit
www.prokits.com.tw
