Copyright 2010 Arfaian Export Import HGmbH, All rights reserved
９
Maintenance and troubleshooting
I. Maintenance
1. Keep the stringing machine in a dry and safe place, ensure to keep it
away from dust, grease, moisture and any type of heat.
2. Every six months inject a little amount of lubricant on the stringing
hook’s adjustment knob, the clip racket arm’s adjustment knob, the clip
racket body to turn part and the stringing-
device’s steel ball part.
3. Don’t allow water, oil and the other acidic material and alkaline
material to enter the inside of the machine.
4. Use a little brush of soft cloth to clean the surface dust.
Don’t use any
liquid or abrasive cleaners.
5. Please turn off the power switch and plug out power cable when not
used for some time.
II. Troubleshooting
1. If the power switch is on but the indicator does not light and the
machine does not work:
• There is no electricity or the power cable may be loose, please check
power and check power cable is securely plugged in.
• Check the Fuse. It may be burnt out. Replace the fuse if necessary.
• The machine inner part may be broken down. (Please contact your
dealer).
2. If the power switch is on and the indicator is lit but the machine still
does not work:
• The stringing-button has locked and doesn't move. (Please contact
your dealer)
• The drivers make bad contact or are damaged. (Please contact your
dealer)
• The machine inner part breakdown. (Please contact your dealer)
