background image

1. Time offset
Select auto or manual for GMT offset adjustments.
2. Country Region
Select the Country Region when [Time Offset] is set to Auto.
3. Time Zone
Select the Time Zone Offset when [Time Offset] is set to Manual.
4.  
If this setting is off, this function does not work. 

This message will appear under no any operation. Press STANDBY button 
to exit sleep / auto-off mode.

(7) Option

To access the Menu, press MENU and select [Option]. The menu provides 
options to adjust the OSD Language, Subtitle Language and Audio 
Language.
Select an option and press RIGHT/LEFT to adjust the setting. Press EXIT to 
exit the Menu. 

Sleep

If this setting is  not  off, but 

1.2.3

hours ,for example select 4 hour, a message will pop up after 4 

Hours, that the device will go in to sleep mode. 

1. Parental Guidance
You can restrict access to channels that are unsuitable
for children. To restrict/lock the channel  you will need to enter either the 
default  password '000000' or your own password.

This device support 2 rating systems used in the United States: 
1),The Motion Picture Association of America's (MPAA) ratings include the 
following ratings: G(General Audiences-All Ages Admitted), PG(Parental 
Guidance Suggested. Some Material May Not Be Suitable For Children), 
PG-13(Parents Strongly Cautioned. Some Material Maybe Inappropriate 
For Children Under 13), R(Restricted, Under 17 Requires Accompanying 
Parent Or Adult Guardian),NC-17 (No One 17 And Under Admitted).

2),The TV Rating system include the following ratings: TV-Y(all children) 
and TV-Y7(directed to older children),TV-G (general audience), TV-
PG(parental guidance suggested), TV-14(parents strongly cautioned), and 
TV-MA(mature audiences only). The letters FV(Fantasy 
Violence),V(moderate Violence), S (mild Sexual situations), L(mild coarse 
Language), D( mature themes suggestive  Dialogue) were added to 
indicate the presence of violence, sex, language, suggestive dialogue 
respectively.

1. OSD Language

2. 

In this menu,you can select CC display CC OFF/CC 1/CC 2…..
And the same you can change all above caption related  parameters 
separately as you want.

Select an OSD language

Close Caption

When this item is highlighted, press the OK button will enter the Closed 
Caption menu as below.

3. Audio Language
Select the preferred audio language for watching TV channels.
If the language is not available, the default program language will be used.
4. Digital Audio
Select digital audio output mode.

To access the  enu, press MENU 

select [System]. The menu provides 

options to adjust the system settings.

elect an option and press RIGHT/LEFT to adjust 

the setting. Press EXIT to exit the  enu .

(8) System Setting

M

and 

Press the UP/DOWN key to s

M

Summary of Contents for PAT102











Reviews: