background image

2

 

 

CAUTION:

THIS DIGITAL VIDEO DISC PLAYER  EMPLOYS A 

LASER SYSTEM.
TO PREVENT DIRECT EXPOSURE TO LASER 

BEAM, DO NOT TRY TO OPEN THE ENCLOSURE. 

VISIBLE LASER RADIATION MAY BE PRESENT  

WHEN THE ENCLOSURE IS OPENED. DO NOT 

STARE INTO BEAM.

WARNING:

TO REDUCE THE RISK OF FIRE OR   ELECTRIC 

SHOCK, DO NOT EXPOSE THIS PRODUCT TO 

RAIN OR MOISTURE.

WARNING:

TO REDUCE THE RISK OF FIRE OR  ELECTRIC 

SHOCK, AND ANNOYING INTERFERENCE, USE 

THE RECOMMENDED ACCESSORIES ONLY.

The lightning flash with arrowhead symbol 

within an equilateral triangle is intended to 

alert the user to the presence of uninsulated 

dangerous voltage within the product`s 

enclosure that may be of sufficient magnitude 

to constitute a risk of electric shock to persons.
The exclamation point within an equilateral 

triangle is intended to alert the user to the 

presence of important operating and 

maintenance(servicing) instructions in the 

literature accompanying the appliance.

FCC NOTICE:

This equipment has been tested and found to  

comply with the limits for a Class B digital  device,  

pursuant to part 15 of the FCC Rules. These limits  

are designed to provide reasonable protection 

against harmful interference in a residential 

installation. This equipment generates, uses and 

can radiate radio frequency energy and, if not  

Installed and used in accordance with the 

instructions, may cause harmful interference to  

radio communications.

However, there is no guarantee that interference 

will not occur in a particular installation.  If this 

equipment does cause harmful interference to   

radio or television reception, which can be  

determined by turning the equipment off and on, 

the user is encouraged to try to correct the 

interference by one or more of the following 

measures:

Reorient or relocate the receiving antenna.         

Increase the separation between the equipment 

and receiver.

Connect the equipment into an outlet on a 

circuit different from that to which the receiver is 

connected.         

Consult the dealer or an experienced radio/TV         

technician for help.

FCC WARNING:

To assure continued compliance, follow the  

attached installation instructions and use only  

shielded cables when connecting to other devices.  

Modifications  not authorized by the manufacturer 

may void user`s authority to operate this device.

IMPORTANT SAFETY INSTRUCTIONS

INDUSTRY CANADA CONFORMITY  

CAN ICES-3(B)/NMB-3(B)

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, 

DO NOT REMOVE COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER  SERVICING 
TO QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation 

exposure limits set forth for an uncontrolled 

environment. This equipment should be installed 

and operated with minimum distance 20cm 

between the radiator & your body.

Cet équipement est conforme aux limites 

d'exposition aux radiations de la FCC établies 

pour unenvironnement non maîtrisé. Cet 

équipement doit être installé et utilisé avec une 

distance minimale de 20 cm entre le radiateur et 

votre corps.

This device complies with Industry Canada licence-

exempt RSS standard(s). Operation is subject to 

the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, 

including interference that may cause undesired 

operation of the device.
Le présent appareil est conforme aux CNR 

d'Industrie Canada applicables aux appareils radio 

exempts de licence. L'exploitation est autorisée aux 

deux conditions suivantes :

(1) l'appareil nedoit pas produire de brouillage, et 

(2) l'utilisateur de l'appareil doit accepter tout 

brouillage radioélectrique subi, même si le 

brouillage est susceptible d'en compromettre le 

fonctionnement.

WARNING: The mains plug is used as 

disconnected device. The disconnect device shall 

remain readily operable. The equipment is Class II 

or double insulated electrical appliance.

It has been designed in such a way that it 

does not require a safety connection to 

electrical earth. 

Summary of Contents for PRCD838BT





















Reviews: