The
Dolby
stereo
mode actively decodes Dolby* surround
encoded audio to provide left, right, and center channel
sound. The center channel makes the actor’s voice appear
to come from the TV screen regardless of where you are
sitting in the room. To hear Dolby 3 stereo, you must
attach right and left front speakers to the
EXTERNAL
speaker
terminals on the back of the TV.
General Recommended Speaker Placement
for Best Dolby 3 Stereo Sound
Connect these speakers
to speaker connectors
labeled
EXTERNAL
on the
back of the
You can easily select
DOLBY
3
STEREO
by repeatedly pressing
the
(surround) button on the master remote control.
You can also select
Dolby 3 stereo
with the
AUDIO MODE
menu
as shown below. Then you
can
use the
DOLBY
3
SETUP
menu
to adjust the functions to your personal preference.
Note: Dolby 3 stereo works best with Dolby surround encoded material,
but will produce clearer dialog and better stereo imaging even on normal
stereo material.
Selecting Dolby 3 Stereo Mode
Connect external speakers to
EXTERNAL
speaker connectors
on the back of the TV.
page
72. Position the speakers to the right and left of the TV
as shown above.
2 Display the
AUDIO MODE
menu and select
Dolby 3 stereo.
3
6
7
Press
MENU
to display
the MAIN MENU.
Press + or-to highlight
the Audio Adjust
function in white.
MENU
again to
display
AUDIO ADJUST
menu.
Press the
+ or button to
highlight
M o d e .
Then press
M E N U t o
display the
AUDIO MODE
menu.
Press + or to highlight
Dolby 3 stereo.
Press
MENU
to turn
Dolby 3
stereo
on.
MENU
again to exit
the AUDIO MODE
menu and return
to
the
AUDIO ADJUST
menu.
S e t u p
will already be highlighted.
*“Dolby”
and the double-D
symbol
trademarks of Dolby Laboratories Licensing
Corporation.
Manufactured under license from Dolby Laboratories Licensing Corporation.
Additionally licensed under one
more of tbe following patents: U.S. numbers
and
Canadian numbers
and
3
Press
MENU
button to enter the
DOLBY
3
SETUP
menu,
Adjust
t h e D O L B Y 3 S E T U P
menu to your
preference.
Press + or-to highlight the function.
Press
when the
spkrs:
(internal speakers)
on/off
function is highlighted to turn the internal speakers
on or
off.
Leave the
spkrs
function set
to
spkrs: on
if you
want to hear the sound from the TV’s internal speakers
which produce the center channel sound.
Press
M E N U
when the
E x t s p k r s :
(external speakers)
o n / o f f
function is highlighted to turn the external right and left
speakers
on
or
off. Leave the Ext spkrs
function set to
spkrs: on
if you want to hear the sound from the speakers
connected
to the
EXTERNAL
speaker connectors.
Press
MENU
when
Volume
is highlighted to enter the
VOLUME
adjustment display. Press + to increase or to
decrease the TV’s volume. This volume control raises and
lowers
the volume of the internal and external speakers.
Note:
If the
VOLUME
display stops before it is at full volume and
the volume is not high enough, check the
Volume limiter to see
if
it is set too low.
Details are on page 24.
Press
MENU
when the
Balance
function is highlighted to
enter
the
BALANCE
adjustment display. Then press + or to
adjust the left/right balance until the sound seems to
originate from a point halfway between the speakers.
Press
MENU
when
Center volume
is highlighted to enter the
CENTER VOLUME
adjustment display. Press + to increase the
volume from the center channel or to decrease the volume
from the center channel.
Press
MENU
when
Noise seqncer
(sequencer):
on/off
is
highlighted to select either
Noise seqncer: on
or off. The
noise sequencer supplies audio noise to each audio channel
(left, right, and center) one at a time. This
allows
to
check and adjust the volume level and balance to each
channel, as well as check to see if all the speakers are
working correctly.
Press
MENU
when
Done
is highlighted to exit the
DOLBY
S E T U P
menu.
Note:
The TV has a built-in
help
screen for
Dolby 3 stereo.
To
use
help
screen press
the
MENU
button to display the
MAIN MENU
and
then press + or-to highlight
Help.
Then press the
MENU
button again to
display
the
HELP MENU
.
After the
HELP MENU
is displayed, press + or
to highlight
Audio Adjust
and then press the
MENU
button. Now follow
instructions on tbe TV screen.
Saving, Restoring, and Returning to Factory Settings
The TV will remember your
when you turn
it off. To prevent losing your personal settings because
someone changes them accidentally, you can save them
using the
MEMORY MENU
.
After the settings have been
saved, you can restore them at a later date using the
The
ME
N
U
also lets you easily
restore the
DOLBY
3
SETUP
menu to its factory settings.
Details are on page 39.
Summary of Contents for PS52682
Page 65: ...I I I I I I I I I I t 1 I I I I 1 II 1 I 1 ...
Page 81: ......
Page 85: ......
Page 86: ......
