S-VHS or Standard VHS Camcorder (Playback)
This connection allows you to play back tapes in the
Notes: If your camcorder has stereo audio cables, connect left to
camcorder and watch them on the TV.
LEFT
and right to
R
/
MONO
.
An S-VHS or standard camcorder can be connected
directly to your TV. If you have another device, such as a
VCR connected to the
INPUT
jacks, you can connect the
camcorder to the
INPUT
2
jacks.
If you have an S-VHS camcorder, connect the S-VHS
video cable to the
S
-
VIDEO INPUT
connector on your TV. If
you have a standard VHS camcorder, connect the video
cable to the
VIDEO INPUT
jack on the back of your TV. With
either video connection, attach the audio cable to the
AUDIO
INPUTS I
audio jack.
If you are planning on using the signal from an S-VHS camcorder in
the small picture during PIP (Picture-In-Picture) operation, be sure to
also connect the normal video cable. S-VHS can not be viewed on
the small PIP picture.
Operation:
If the camcorder is connected to the
INPUT
jacks, select TV channel 91 to view whatever the
camcorder is playing.
If the camcorder is connected to the
INPUT
2
jacks, select
TV channel 92 to view whatever the camcorder is
playing.
supplied
w i t h c a m c o r d e r )
AV IN Jack
( A u d i o / V i d e o I n )
S-VHS or Standard VHS Camcorder (Recording)
This connection allows you to record onto the camcorder
whatever is currently being displayed on the TV screen.
You will also be able to record signals from a VCR (or
similar device) that is connected to the TV’s
INPUT
or
INPUT
2
jacks.
The TV must remain turned on during recording. If you
change channels on the TV, the channel change will be
recorded on the camcorder tape unless you pause the
camcorder during recording.
If you connect a surveillance system to your TV, you
will be able to record what the camera is displaying on
the TV screen by connecting another camcorder (or
VCR) to the
SELECT
jacks as shown here.
Optional S-VHS (Super VHS):
If your camcorder has
an
S-VHS IN
connector, connect it
to
the
SELECT S-VIDEO
OUTPUT
connector on the TV in addition to the audio
cables.
You may also want to use this connection to dub or edit
VCR tapes with two or three camcorders (or VCR’s). By
connecting one camcorder (or VCR) to the
INPUT I
jacks
and another camcorder (or VCR) to the
INPUT
2
jacks, you
will be able to selectively edit and record whatever is
Operation:
To see the signal from a device connected
to the
INPUT
jacks, select channel 91. Select channel
92 to see the signal from a device connected to the
INPUT
jacks.
Note: Menus and displays like clock and channel do not come
through the
SELECT OUT
jacks.
playing on the TV screen onto a third camcorder connected
The small picture from picture-in-picture can be recorded from the
as shown here to the
SELECT
jacks.
SE
L
ECT OUT
jack.
* Optional accessories are available from most dealers and electronics supply stores.
Mail orderform is on page 75.
Summary of Contents for PS52682
Page 65: ...I I I I I I I I I I t 1 I I I I 1 II 1 I 1 ...
Page 81: ......
Page 85: ......
Page 86: ......