Noisy stereo reception
l
Maybe a weak station. Set the
Mode: stereo/mono
function in
the STEREO SETUP
menu to
Mode: mono.
Details are on page 28.
No picture, no sound but power light is on
l
Wrong antenna input
(
A
or
B
)
selected. Try pressing
ANT
(antenna) button on master remote.
Details are on page 41.
l
Cable/air
function on
SETUP
menu has been accidentally
changed.
Details are on page 40.
l
Maybe a vacant channel is tuned.
l
For channels 9 1 and 92, make sure the component connected
to
those
INPUT
jacks is turned on.
l
If watching VCR (connected only through antenna input),
make sure TV is tuned to channel 3 or same as
CH
4
switch on VCR. Also check to make sure
switch on
VCR is in correct position.
Sound okay, picture poor
l
Check antenna connections.
l
Try adjusting
SHARPNESS
function to improve weak signals.
l
If recording one channel on VCR connected to
ANT
input and
watching another channel on the TV, make sure the VCR’s
switch is in correct position
(VCR
indicator turned off).
No picture while using picture-in-picture with VCR, laser
disc player, or camcorder.
l
If using an S-VHS component, make sure its regular video
cable is also connected
to
the
INPUT
jack on the TV. S-VHS
video can not be viewed on the small picture.
l
If using the
or
button, make sure it is programmed to
select the proper channel
as described on page 43.
No audio while using picture-in-picture with VCR, laser disc
player, or camcorder.
l
Be sure to connect audio cables in addition to S-VHS cable.
The S-VHS cable carries only video, no audio.
TV shuts off and then comes right back on
l
Power interruption may have occurred.
l
Automatic shutdown circuit may have been triggered
as
described on page 4.
Summary of Contents for PS52682
Page 65: ...I I I I I I I I I I t 1 I I I I 1 II 1 I 1 ...
Page 81: ......
Page 85: ......
Page 86: ......