Operation steps
3
7. Touch the symbol HEATING “ ” the warm mist will come out after 10~15 minutes. On the LED
display, it shows the same symbol “ ” . Touch again to stop the function. Mist will become cool.
10. Timer setting: There are 12 timer setting: 1,2,3,4,5,6,7,8,9,10,11,12 hours. Touch the symbol
TIMER “ ” , the LED display will show the desired setting timer. The timer shows the rest
operation time and decreases by 1 hours.
8. Constant humidity: Before you touch the symbol HUMIDITY “ ” , LED display shows the
current humidity. You may set the humidity arranged from 30%RH to 75%RH. It will increase by
5%RH.
9. Touch the symbol MODE “ ” , baby mode will be turn on (keep constant humidity at 55% with
warm mist and anion turn on). In baby mode,mist output speed cannot be set. Press symbol MODE
“ ” again to enter auto mode. Press MODE “ ” for two seconds to enter sleep mode. In sleep
mode, display and water tank indication light will turn off and “ ” will be turn on. Humidifier will
keep running. Touch any button to cancel sleep mode and display will turn on.
Temperature of the
air, degrees Celsius
≤66
65
68
60
70
58
72
57
76
53
78
50
80
48
90
36
84
43
92
35
94
34
88
38
86
40
82
45
98
31
96
32
100
30
≥102
25
74
55
Humidity(%)
11. Auto Shut-Off: Once the water in the basin is too little to keep the machine working, the
machine will automatically stop working. LED shows the shape of lack of water “ ” . Refill the
water, and the machine will restart. If don’t refill water within 15 minutes, the machine will
automatically power off.
12. Slide the symbol MAX-MIN “ ” , AUTO mode is cancelled and the mist
output is in the first speed. You may select 7 desired levels of mist volume. The corresponding
strip symbol will appear on the display.
3. Put the water tank on the main
base.
5. Touch the symbol POWER “ ” on the machine. The machine will begin to work in AUTO mode.
Display shows AUTO symbol.
4. Check if the rated voltage meets the input voltage, and
plug into the socket. Then display shows the current
temperature and humidity.
Temperature
Humidity
6. Touch the symbol ANION “ ” the anion generator works. On the LED display, it shows the
shape of anion “ ” . Touch again to stop the function.
