The appliance will automatically turn off when the setting time 50 seconds is
ended. The memory function saves the current mode for next-time use.
Pause Control
● Lean low over sink and place the
nozzle in mouth.
● Aim the nozzle towards teeth.
Place the nozzle in your mouth.
● Aim the stream as perpendicular as
possible to the teeth or the edge between
teeth and gums.
● Move slowly along the teeth.
● Take extra care between the teeth and around braces.
Recommended Method
Press the button to turn on the Water Flosser.
● It can be used for approximately 50 seconds with a full tank of water.
● Always hold the appliance vertically with the nozzle upward.
● Close your mouth slightly so the water will not splatter.
● Press the switch button to select the mode for first-time use. Get a suitable
working mode or as instructed by your dental professional.
● You can temporarily stop the flow anytime by pressing the switch button for
5 seconds.
Adjusting the mode setting
Normal mode: Normal oral cleaning.
Soft mode: Gently clean the teeth and gum line.
Pulse mode: Effectively clean up the residue and
plaque.
Normal
40-90PSI
6000-7000
RPM
5000-6500
RPM
Soft
20-50PSI
Pulse
15-90PSI
4000-7000
RPM
