Product Maintenance
Repair of this product should be performed only by an authorized service center
or by Taiwan Proscenic Technology Co., Ltd. You may also contact your local
distributor for product and service information.
For all your service needs, please go to www.proscenic.tw
Maintenance
Nozzle
1. Remove the nozzle by pressing the nozzle release button.
2. Wash with water and wipe with a cloth.
3. You are suggested to replace the nozzle in 6 months time. If the tip of nozzle
gets deformed, please replace immediately. Damage of nozzle may result in
malfunction.
Main unit
1. Remove the dirt by using cloth with liquid soap, and wipe off by using a dry
cloth.
2. Wash with water if it is very dirty. Dry afterwards.
3. Do not wash using hot water over 50 ℃.
Water tank
1. Wash with water and wipe with a cloth.
2. Dry the tank when not using for a long period.
Only use mild detergent. Never use benzine or alcohol since it may
cause malfunction or cracking or discoloration of the parts.
Troubleshooting
It only works for a few minutes even after charging.
Contact service center for support.
The battery has reached the end of its life cycle.
Charge the appliance continuously over 16 hours.
The battery has reached the end of its life cycle.
Water Pressure is very low.
There is dirt stuck in the nozzle.
Replace the nozzle.
The nozzle is deformed.
Water dose not come out.
Use with the appliance as vertical as possible.
The appliance is tilted too much while in use.
Replace the nozzle.
There is dirt stuck in the nozzle.
Remove the nozzle and reinstall.
The nozzle is not properly installed.
Appliance dose not run.
Charge the unit for at least 10 hours.
You have just purchased the product or it has been left unused for more
than 3 months.
