Pros'Kit SS-256E Manual Download

Page: 2 / 6

SLP

：

Auto sleep mode setting

(Fig.7)

Choose the “SLP” function setting. Press knob into sleep selection mode.

rotate around the shuffle knob to setting, sleep timer is adjustable from
1~240 minutes or setting “OFF” stop sleep mode activate ,after
setting ,press knob to the next menu, rotate around the shuffle knob and
choose the “ Exit” save and exit the menu.

In sleep mode ,the heater temperature will down to the 200

℃

, If need to

start soldering, press knob to wake up, temperature will rise to setting
temperature.

Fig.7

BEEP

：

Beep setting

(Fig.8)

Choose the “BEEP” function setting. Press knob into beep selection mode.
rotate around the shuffle knob to setting switch “ON” or “OFF” mode ,after
setting ,press knob to the next menu, rotate around the shuffle knob and
choose the “ Exit” save and exit the menu.
When beep is setting “ON” mode, press knob will have key beep.

Fig.8

LIGH

：

LCD screen brightness adjustment

(Fig.9)

Choose the “LIGH” function setting. Press knob into LCD screen
brightness adjustment mode. rotate around the shuffle knob to setting
brightness 0~9 ,after setting ,press knob to the next menu, rotate around
the shuffle knob and choose the “ Exit” save and exit the menu.

Fig.9

CODE: Temperature passcode setting

(Fig.10)

1. Choose the “CODE” function setting. Press knob into Passcode
selection mode. rotate around the shuffle knob input the old code and new
code ,after setting ,press knob to the next menu, rotate around the shuffle
knob and choose the “ Exit” save and exit the menu.
2. In the main menu, press 3 seconds of shuffle knob, input the passcode,

into the function setting menu, now can start to do any setting.

3. Cancel passcode : In the main menu, press 3 seconds of shuffle knob,

input the passcode, into the function setting menu, follow the

procedure 1 reset new code “000” .

4. After setting, press knob to the next menu, choose the “Exit” save the

setting and exit the menu.

CAUTION:

Factory initial setting is “000”, this code without lock

function.

Fig.10

EXIT

：

Save and Exit (Fig.11)

Fig.11

Temperature Calibration Set

The soldering iron should be recalibrated after changing the iron, or
replacing the heating element or tip.

In the main menu, press knob for 6 seconds into the “CALI ” mode (see

Fig.12), rotate around the shuffle knob and input the real temperature.

Press knob to save the temperature and exit back to the main menu.

Fig.12

Calibrating the iron temperature

Setting the soldering iron station temperature to 350

℃

, when the

temperature stabilizes, use soldering iron tip thermometer measurement

and record tip real temperature, enter the real temperature in the “CALl”
state ,soldering iron station will calculate temperature.

3 CALI. Status description
3.1.

When “CALI” status display “- - -“(see Fig 13),it means temperature

have not calibration.

Fig 13

3.2.

When “CALI” status display “H” or “HH” (see Fig 14.),it means “Real

Temp.” has calibrated and increase temperature.
For example :“set.Temp”is 350

℃

, "Real Temp.”is 320

℃

, after temperature

calibration as Fig 12.,temperature will rise to 350

℃

3.3.

When “CALI” status display “L” or “LL” (see Fig 15.),it means “Real

Temp.” has calibrated and decrease temperature.

Fig 14

Fig 15

3.4.

When “CALI” status display “HHH” (see Fig 16.),it means “Real Temp.”

has calibrated to max. temperature, can not increase anymore, but it can
decrease temperature.

3.5

When “CALI” status display “LLL” (see Fig 17.),it means “Real Temp.”

has calibrated to minimum temperature, can not decrease anymore, but it
can increase temperature.

Fig 16

Fig 17

Reset

In the main menu, press knob for 9 seconds into the “REST ” mode, initial

setting is “NO” (see Fig18), rotate around the knob , choose “YES” (see

Fig 13) and press knob confirm it, Press knob to save and exit back to the

main menu.

Fig 18

Passcode forgot and reset

If forgot passcode, turn off the power, press knob and power in the same
time,), input passcode “888” , the soldering iron station will reset passcode
become”000”.

For further more detailed information, please visit Pro’skit
website