ProsKit SS-969B, User Manual

SAFETY INSTRUCTIONS 

WARNING 

Warnings and cautions are placed at critical points in this manual to direct the 

operator’s attention to significant items. They are defined as follows: 

WARNING: Failure to comply with a WARNING may result in serious injury or 

death. 

CAUTION: Failure to comply with a CAUTION may result in injury to the   

operator, or damage to the items involved. Two examples are given below. 

NOTE: A NOTE indicates a procedure or point that is important to the process 

being described. 

EXAMPLE: AN EXAMPLE is given to demonstrate a particular procedure,   

point or process. 

Be sure to comply with following WARNINGS and CAUTIONS for your safety. 

WARNING 

Do not change or disassemble any components related to this product, it may 

cause product damaged. 

When you need to replace the fuse, be sure turn off the power before 

operating.  

During working period, do not turn off the power suddenly, the heat gun 

should be placed on the heat gun holder until cool off after power turn off, 

otherwise it will damage the product

。

CAUTION 

When the power is ON, the temperature of the hot air and the nozzle ranges 

from 100 to 450

(212 to 842

). To avoid injury to personnel or damage to 

℃

℉

items in the work area, observe the following: 

** Do not direct the hot air toward personnel or touch the metal parts near the 

nozzle. 

** Do not use the product near combustible gases or flammable materials. 

** Advise those in the work area that the unit can reach very high temperatures 

and should be considered potentially dangerous. 

** Turn the power OFF when no longer using the Pro’sKit SS-969 or when   

leaving it unattended. 

** Before replacing parts or storing the unit, allow the unit to cool and then turn 

the power OFF. 

To prevent accidents and failures, be sure to take the following precautions: 

1