ProsKit SS-969B, User Manual

5. Press 

“

▲

”

or 

“

▼

”

button as to set up the temperature. 

6. Adjust the airflow knob to set up the required air volume. 

7. Hold the handle, the equipment begins to heat. Adjust the knob of airflow in 

order to set proper air volume, operate normally when temperature is stable. 

8. Put the handle back on the holder after work, the SMD station switched from 

heating mode to cooling - off mode automatically. When the temperature is 

lower than 100

℃

, the station switching to standby mode. 

9. Switch the power off and unplug the power cord if there has no operation for a 

long time. 

Attention 

Please set up the temperature as lower as possible in high airflow volume as to 

prolong heating element service life and better IC chips protection. 

Setting up Temperature 

1. Press 

“

▲

”

or 

“

▼

”

button to set up the temperature, the screen displays the   

setting temperature. 

2. Press “

▲

” once the temperature degree increase 1

℃

, and the screen displays   

the setting temperature. 

  Press “

▼

” once the temperature degree decrease 1

℃

,and the screen   

displays the setting temperature. 

  When press the 

“

▲

”

or 

“

▼

” 

button continuously, the temperature will   

    increase or decrease rapidly, after the button is released, the screen   

    displays temperature for two seconds and displays setting temperature   

or display 

“- - -“

 for standby mode. 

5