General
This instrument is a high performance and accuracy digital
multimeter driven by 9V battery. It uses the LCD with 26mm high
figure to make the reading clear and the operation more
convenient.
This instrument can measure DC and AC Voltage, DC and AC
Current, Resistance, Capacitance, Frequency, Diode, Transistor,
Continuity, Temperature, etc. It is an excellent instrument with the
dual-integral A/D converter as core, mostly suitable for lab, factory,
maintenance and repair users.
Safety Note
This instrument meets the standard of IEC1010 (safety standard
promulgated by International Electrician Committee), please read
the safety notes carefully before operation.
1
．
Do not input the value over the range limit when measuring
each range.
2
．
The safety voltage is below 36V, please make sure the test
leads connect reliably, link up correctly, isolate properly to
avoid electric shock when measuring the voltage higher than
36V DC or 25V AC.
3
．
Please make sure the test leads off the tested point when
converting the function and range.
4
．
Please select the correct function and range to avoid the fault
operation. Even through the instrument has full protection
function; please pay high attention when measuring for safety.
5
．
Do not operate the instrument before the battery is fixed on
properly and battery compartment is screwed tightly.
6
．
Do not input the voltage when measuring the resistance.
7
．
Please make sure the test leads off the tested point and the
power is turned off before replacing the battery or fuse.
Safety Note Description:
“
” indispensably refer to the manual
，
“ ” GND ,
“ ” Double Insulation, “
” low battery
。
1
