background image

5. Do not use an extension cord unless it is absolutely necessary. 

To use an improper extension cord may cause the risk of fire, 
electric shock or electrocution. 

6. Do not use the charger if it has been subjected to a heavy 

knock, dropped; otherwise damaged in any way. Take the 
charger to an authorized service centre for a check or repair. 

7. Do not charge with higher voltage than indicated as charger 

specification; otherwise, the charger will burn up. 

8. Do not disassemble the charger. Take it to an authorized 

service center when it doesn’t work or other problem 
happened. Incorrect re-assembly may result in the risk of fire, 
electric shock or electrocution. 

9. Suitable charging environment:   

 

Charging temperature: 0°C ~40°C (32°F~104°F) 

 

Discharging temperature: 0°C ~40°C (32°F~104°F) 

 

Storage temperature: -20°C ~60°C (-4°F~140°F) 

 

ADDITIONAL SAFETY WARNINGS 

OF TOOL & CHARGER 

1. 

This appliance is not intended for use by persons (including 
children) with reduced physical, sensory or mental capabilities, or 
lack of experience and knowledge, unless they have been given 
supervision or instruction concerning use of the appliance by a 
person responsible for their safety. 

2. 

Children should be supervised to ensure that they do not play 
with the appliance. 

3. 

If the supply cord is damaged, it must be replaced by the 
manufacturer, its service agent or similarly qualified persons in 
order to avoid a hazard.

 

Summary of Contents for PT-1362U

















Reviews: