background image

~

1

~

Precautions

1. To assure the finest performance, please read this manual carefully. keep it in a safe place for future 

    reference.

2. Do not use force on switches or connection wires. When moving unit, first disconnect the powerplug 

    and the wires connected to other equipment. Never pull the wire itself.

3. Install this unit in a cool, dry, clean place--- away form window, heat sources of excessive vibration, 

    dust, moisture and cold. To prevent fire or electrical shock, do not expose this unit to rain or water.

4. Only use provided power adapter, and confirm the voltage is correct to the adapter, The   use of 

    other power adapter may damage the machine and void your warranty.

5. The machine use 220VAC power supply voltage, the use of other voltage may cause fire and fault.

6. Avoid collisions or vibration of the machine.

7. Never open or try to change the circuit of the receiver, transmitters and the power adapter. This 

    could damage your machine and void your warranty. If the machine fails to work, please send to the 

    Maintenance Service Center authorized.

8. Be sure to read the"troubleshooting"section regarding common operating errors before concluding 

    that the unit is faulty.

9. If there are any abnormal cases happened during using, such as smoke,odor,etc.,please unplug the 

    adapter immediately,and send the machineto the Maintenance Service Center authorized asap.

10. Use the 2A alikline batteries or rechargeable batteries for the transmitter.Be sure the polarities are 

    correct.(See the illustration inside the battery compartment.)Remove the batteries if the

    transmitters will not be used for an extended period of time.

11. When not planning to yse this machine for long periods of time,disconnect the power adapter plug 

    form the wall outlet.12.Do not attempt to clean the unit with chemical solvente;this might damage 

    the finish.Use a clean,dry cloth.

Contents Features

The front panel name and function

The rear panel name and function

Handheld

 

Transmitter

Bodypack

 

Transmitter

Six, the infrared frequency

Eight, open process equipment

Technical indicators

   

3-

6

3-6

7

9

10

7

9

~

2

~

the menu operation method

8

Precautions

1

Contents Features

2

Conference

 

Transmitter

8

Summary of Contents for IU-4009








Reviews: