MVI56E-AFC / MVI69E-AFC ♦ Enhanced Liquid and Gas Flow Computer Connecting the AFC Module to the EAFC Manager
ControlLogix® and CompactLogix™
Setup and Configuration Guide
ProSoft Technology, Inc.
Page 102 of 151
Connect the other end of the cable to the network. The PC running EAFC Manager must
be on the same network.
17.2 Serial Connection
This section describes how to connect your PC to one of the serial ports on the module.
1
Connect the DB-9 adapter to a serial port of the AFC module (P1 or P2).
2
Connect the null-modem cable to the DB-9 adapter cable. Connect these to an
available serial port on your PC.
Note: Some desktop and notebook computers are not equipped with a serial port. In this case, you may
require a USB to Serial adapter cable, with drivers. Not all USB to Serial adapters will work correctly
with this application. If you encounter problems, please contact ProSoft Technical Support for
recommendations.
Summary of Contents for MVI56E-AFC
Page 78: ......